High Rollerz Trux

 Full Progressive Spring Pack

These full length progressive spring packs are built by Deaver Spring Mfg specifically for Carli Suspension. These springs were designed as a two stage spring pack, enabling the truck to still have a admirable weight capacity while offering smooth and comfortable street driving performance.

Overview

These leaf springs were designed to carry the weight of the Dodge Ram Truck, offering a moderate load capacity, while producing a smoother, more comfortable ride. This was done by changing the upper rate of the spring pack, thus allowing full control of the rate from the top to the bottom. So as the spring progresses, the rate increases. When a load is applied the spring rate will increase as it compresses onto the secondary bottom stack of the spring pack. This was built in to reduce any additional squat or sag under heavy load. The upper rates are much lower than factory to give an improved ride quality for daily driving, especially freeway expansion joints.

Performance Enhancements

The main leaf was designed a set distance longer, which moved the truck’s shackle position back. This gives almost a zero rate effect on the freeway when empty. When you move the shackle position back, it eases the first movement for the axle, rendering smoother travel.

Tire Size Compensation

The center pin location was changed which allows for full travel with larger tires. Running OEM springs, with a 37 tire, at full compression, the tire will come in contact with the front of the rear fender well, creating unwanted damage. With Carli’s center pin location moved rearward, at full compression with 37’s, the tire will move all the way up into the center of the wheel well. This provides for maximum wheel travel with larger tires and improves the street driving of the vehicle.